6.8 Adjusting the footrest
To facilitate the transport and transfers, the wheelchair Magix is equipped with a mono-bloc lift-type footrest and
adjustable in different positions.
To raise the footrest it is necessary to lift the front of the footrest and pull back toward the top and toward the rear.
Vice versa to lower.
Adjustment of the tilt of the footrest:
It is possible to change the tilt of the footrest. For this procedure it is necessary to:
- Loosen the jam nuts #1
- Screw or unscrew the screws #2 to obtain the desired tilt
- Retighten the jam nuts #1
To Next Page
Loading...