Need help?Do you have a question about the Newman EPR-24 and is the answer not in the manual?
Details warranty terms, conditions, and exclusions for machines and parts.
Outlines essential safety rules, conventions, and hazard symbols for machine operation.
Details fundamental safety rules and concerns applicable to planer operation.
Specifies safe operational rules, guards, electrical, and brake precautions.
Details operator and feeder console controls, including their functions and operation.
Explains the functions of the main operator's control console.
Provides a schedule and identifies points for proper machine lubrication.
Details the recommended lubrication intervals and lubricants.
Outlines recommended scheduled maintenance tasks for machine upkeep.
Details procedures for aligning critical machine components for optimal performance.
Step-by-step guide for aligning the planer's bedline for accurate cuts.
Instructions for leveling the top head assembly for consistent planing.
Procedures for aligning the pressure bar for proper lumber contact.
Steps for setting chipbreaker height and tension for optimal chip control.
Covers leveling the bottom cutterhead and adjusting related assemblies.
Emphasizes personal safety, devices, guards, and practices during operation.
Explains the function of built-in safety features like cutterhead brakes.
Stresses the importance of keeping machine guards in place and intact.
Specific safety precautions when clearing jams.
Safety advice regarding rotating cutterheads.
Safety advice regarding feed-roll pinch points.
Safety advice to prevent lumber ejection or kickback.
Provides step-by-step instructions for safely clearing lumber jams.
Covers the process of setting up and running the planer.
Details how to set the depth of cut for top and bottom cutterheads.
Steps to set the depth of cut for the top cutterhead.
How to set bottom cutterhead cut with ACC.
Explains procedures for jointing and grinding cutterheads.
To Next Page
General