Dongguan Newmen Electronics Technology Co., Ltd
1.3 Function Description：
① Bluetooth alignment: In wireless mode, long press any combination of
FN+Q/W/E for 3 seconds to enter the alignment state (for example, if
you press FN+Q, the Q indicator will flash quickly and save it under
FN+Q after successful connection)
② Device switching: In wireless mode, press FN+Q/W/E/R to switch between
three Bluetooth devices and one 2.4G device
③ Name of Bluetooth device: GM840 BT 3.0 / GM840 BT 5.0
④ Name of the wired device: Newmen Bluetooth Keyboard, VID: 12C9 PID:
6004
⑤ Wired and wireless switch: Hold down FN+TAB for 3 seconds to switch mode
⑥ TAB key indicator: red - wired mode, blue - wireless mode, blinking after the
switch is successful
⑦ "FN" key indicator: keyboard low power, FN indicator flashing red
⑧ Eight light effect: five light speed adjustment, four brightness adjustment,
light effect includes: drift, key ripples, rainbow roulette, sine wave, stream,
stars, RGB diffusion, rotating storm, horse, flower rich, serpentine horse,
interspersed to run, stay change, off, on, breathing mode, neon, snow
without trace, trigger
⑨ Working current ≤200mA (luminous state)
⑩ Wireless: No luminescence Working current ≤18mA 5min Standby current
≤1mA 30min hibernation current ≤0.5mA
⑪ Capitalization indicator: The capitalization function is on and the CAP key
indicator is on
⑫ Code alignment: In wireless mode, switch FN+R to 2.4G mode, hold down
FN+R for 3 seconds to enter code alignment, the green indicator blinks
To Next Page
Loading...
