Need help?Do you have a question about the NewTek TriCaster Mini HD-4 and is the answer not in the manual?
Connect power, keyboard, mouse, and monitors for initial setup.
Connect camcorders, microphones, and audio mixers to the system.
Configure audio output and display options for monitoring.
Guides through the first power-on and product registration process.
Learn to create and start a new production session with defined settings.
Connect and configure camcorders as video sources for the production.
Choose video sources using the switcher interface for your live show.
Master transitions like TAKE, AUTO, and T-Bar for source switching.
Learn the basics of switching multiple camera feeds and sources.
Load and play pre-produced video clips into the DDR for your show.
Create and apply title graphics or other overlays to your video output.
Store and access frequently used graphics or logos using buffer slots.
Configure computers and devices to be used as network video sources.
Link network devices like computers and iOS devices to TriCaster inputs.
Set up and execute a live stream of your production to the web.
Explore advanced layering and transitions using the Mix Effects panels.
Remove backgrounds from video sources using the LiveMatte keying technology.
Implement 3D virtual environments to enhance your studio production.
Record program output or individual camera feeds for later use.
Share your show content directly to social media platforms.
Create custom one-button shortcuts for complex sequences.
Connect power, keyboard, mouse, and monitors for initial setup.
Connect camcorders, microphones, and audio mixers to the system.
Configure audio output and display options for monitoring.
Guides through the first power-on and product registration process.
Learn to create and start a new production session with defined settings.
Connect and configure camcorders as video sources for the production.
Choose video sources using the switcher interface for your live show.
Master transitions like TAKE, AUTO, and T-Bar for source switching.
Learn the basics of switching multiple camera feeds and sources.
Load and play pre-produced video clips into the DDR for your show.
Create and apply title graphics or other overlays to your video output.
Store and access frequently used graphics or logos using buffer slots.
Configure computers and devices to be used as network video sources.
Link network devices like computers and iOS devices to TriCaster inputs.
Set up and execute a live stream of your production to the web.
Explore advanced layering and transitions using the Mix Effects panels.
Remove backgrounds from video sources using the LiveMatte keying technology.
Implement 3D virtual environments to enhance your studio production.
Record program output or individual camera feeds for later use.
Share your show content directly to social media platforms.
Create custom one-button shortcuts for complex sequences.
General| Mix/Effects Buses (M/E) | 1 |
|---|---|
| Multiviewer | Yes |
| Live Switching | Yes |
| Virtual Sets | Yes |
| Video Inputs | 4 |
| Audio Inputs | 4 |
| Streaming | Yes |
| Recording | Yes, up to 1080p |
| Control Surface | Yes |
| Supported Resolutions | 1080p |
| Graphics | Built-in graphics capabilities |
| Network Connectivity | 1 x Gigabit Ethernet |
| USB Ports | 4 |
| Power Supply | 100-240V AC |
To Next Page
