EasyManua.ls Logo

Newwave NW 800 - Care and Cleaning Instructions

Newwave NW 800
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
newwaveka.com.au
Before cleaning, switch off the Multi-Cooker at the power outlet and then unplug.
Always allow the appliance to cool before cleaning.
Clean the outer black housing with a soft damp cloth and then dry thoroughly.
Remove the inner bowl and clean the inside of the cooker, including the sealant washer,
pressure discharging valve, anti-blocking case, steam relief pipe, floating valve with water and
a damp cloth.
Clean the pressure release valve and the water drain hole with a small brush,
so that water can freely discharge.
For normal washing of the inner bowl use warm soapy water and
rinse thoroughly.
To remove stubborn, cooked on foods in the removable inner bowl, soften by filling it with
warm soapy water and allow to soak for 1 hour. Remove by scrubbing with a soft nylon non-
scratch kitchen brush.
Do not put any part of your 5-in-1 Multi-Cooker in the dishwasher.
Never use abrasive cleaners, steel wool or metal scouring pads as they
can damage the surface of your cooker.
Do not use metal utensils for stirring in the bowl as they will cause damage.
Empty the Steam Water Storage cup at the rear of the unit.
Care And Cleaning