Need help?Do you have a question about the Nexcom NISE 2100 and is the answer not in the manual?
General| HDMI | 1 x HDMI |
|---|---|
| Processor | Intel Celeron |
| Chipset | SoC integrated |
| RAM | Up to 32GB DDR4 |
| Storage | 2 x 2.5" SATA HDD/SSD |
| Ethernet | 2x Gigabit Ethernet |
| USB Ports | 4 x USB 3.0 |
| Serial Ports | 2 x RS-232/422/485 |
| Video Output | HDMI |
| Expansion Slots | 1 x Mini PCIe |
| Dimensions | 200 mm x 150 mm x 55 mm |
Provides essential warnings, cautions, and recommendations for safe installation and operation.
Details pin assignments for front panel connectors like USB, COM5, and GPIO.
Provides pinout definitions for rear panel connectors including VGA, LAN, and serial ports.
Step-by-step guide for installing a SODIMM memory module into the socket.
Detailed steps for installing a 2.5" SATA hard drive for NISE 2100/2100A models.
Describes how to enter the BIOS setup utility using keyboard commands during system boot.
Details various advanced system configuration options available in the BIOS.
Explains settings for IDE and SATA drives, including SATA mode configuration.
Explains how to configure hardware monitoring for temperature, fan speed, and voltages.
Describes settings for system boot order, boot device priority, and boot messages.
Details North Bridge and South Bridge chipset configurations, including graphics and USB.
Covers setting supervisor and user passwords to protect system access.
Provides C code and instructions for programming the watchdog timer via ITE8783.
To Next Page