Need help?Do you have a question about the Nexcom NISE 3500Series and is the answer not in the manual?
Provides critical warnings and cautions for safe operation and handling of the equipment.
Lists essential safety instructions for operating and maintaining the computer system.
Lists comprehensive specifications for the main board, I/O interfaces, device, and expansion.
Provides essential safety precautions and preparation steps before working with jumpers and connectors.
Explains the 44-pin D-Sub serial connector (CN4) and its pin assignments for COM ports.
Provides detailed DB44 to DB9 pin mappings for COM1 (RS232), COM2 (RS232/RS422), COM3 (RS232), and COM4.
Provides illustrated guidance on how to properly install a DIMM memory module.
Step-by-step instructions for safely installing the CPU processor into its socket.
Guides the user through the process of installing a SATA hard drive into the system.
Overview of the Advanced menu, covering CPU, SATA, USB, IO, and other system configurations.
Details CPU configuration options and S5 RTC wake settings within the BIOS.
Covers SATA drive configuration modes (IDE, AHCI, RAID) and various CPU-related settings.
Covers USB device configuration (Legacy Support, EHCI Hand-off) and Super IO chip settings.
Details settings for AMT function, including Unconfigure AMT/ME, Watchdog Timer, and OS/BIOS Timers.
Covers BIOS settings for USB devices and Intel Management Engine (ME) subsystem configuration.
Details settings for controlling the boot process, including boot options, NumLock state, and ROM messages.
Covers setting administrator/user passwords and options for saving or discarding BIOS changes.
Step-by-step guide to enabling Intel AMT functionality through the AMI BIOS settings.
Details the process of accessing and configuring the Intel ME setup utility, including password entry.
Provides steps to unconfigure Intel AMT/ME settings, clearing all associated system configurations.
Guides on installing and launching the Intel Embedded AMT Management Express utility.
Details how to scan the network to discover iAMT computers using IP address ranges.
Explains how to add discovered iAMT computers, including entering BIOS username and password.
Guides on connecting to a selected remote iAMT computer via the application.
Details how to initiate and set up a Remote KVM session, including VNC password entry.
Explains how to view the remote computer's current image after establishing a KVM session.
Guides on installing the Intel Manageability Commander Tool for KVM access.
To Next Page
General
