Need help?Do you have a question about the Nexersys Cross Body Trainer and is the answer not in the manual?
General| Product Name | Nexersys Cross Body Trainer |
|---|---|
| Category | Fitness Equipment |
| Sensors | Impact sensors |
| Workout Programs | Multiple pre-set programs |
| User Feedback | Real-time Feedback |
| Power Source | Electric |
Connect two under tubes to the three-way pipe using specified bolts and washers.
Connect left and right rear tubes to the under tube using specified hardware.
Thread cable through lower tube, then attach to three-way pipe with bolts and washers.
Attach the two rear supporting-tubes to the left and right rear tubes.
Thread cable through middle tube, attach to lower pipe, and connect rear supporting-tubes.
Attach two M8X50 Bolts, washers, and locknuts to the rear supporting-tube.
Attach the mobile device holder bracket to the top tube.
Thread cable through top tube and attach to middle tube with hardware.
Attach the double end bag to the cable and remove the nylon rope.
Attach front and rear base plates to the under tube using bolts and locknuts.
Place ballast with water to the base plates and secure it.
Attach the skirt from the top, ensuring cable exits through the hole and zipper is fastened.
Connect the bottom of the cable to the double end bag with an adjusting strap, ensuring tightness.
Attach the bracket torque bolt to the mobile device holder bracket.
Attach the knob to the holder bracket, insert the ball into the holder, and tighten the knob.
Verify mobile device has Bluetooth 4.0 LE or later for sensor connection.
Download the Cross Body Trainer App on your mobile device.
Activate Bluetooth on your mobile device to enable sensor pairing.
Unwrap the sensor, insert AAA batteries, and place it into the holder.
Open Bluetooth menu in app, wake sensor by tapping bag, and click pair.
Details on what is covered, including electronic parts, wear parts, and frame, with specific terms.
Describes Nexersys's commitment to replacement or credit for defective components.
Outlines owner duties such as retaining proof of purchase and proper product use.
Lists damages not covered, such as abuse, misuse, accidents, or failure to follow instructions.
Provides contact information for warranty support via email.
Details exclusions, limitations on implied warranties, and remedy limitations.
Explains state-specific rights, warranty expiration, and post-warranty services.
To Next Page