Need help?Do you have a question about the Nexigo Aurora and is the answer not in the manual?
Plug the projector into a power outlet and insert batteries into the remote control.
Turn on the projector and pair the remote control for operation.
Configure language, network connection, and installation method.
Adjust the projector's physical position for optimal screen display.
Use software settings to correct image distortion and focus.
Steps to safely power down the projector.
Ensure proper airflow by keeping vents clear of obstructions.
General| Contrast Ratio | 10000:1 |
|---|---|
| Lamp Life | 30, 000 hours |
| Connectivity | HDMI, USB, AV, VGA, Audio Out |
| Aspect Ratio | 16:9 |
| Speaker | 5W |
| Native Resolution | 1920x1080 (Full HD) |
To Next Page
