US 21
DLNA - SHARE THE DISPLAY OF YOUR DEVICE THAT SUPPORTS DLNA
CONNECTIONS.
To connect with DLNA, as with the other steps, first ensure that both
devices are connected to the same network.
On the projector, select DLNA from the options. On the device you want
to cast from, open an app that supports casting, YouTube is an example,
and then tap the button on the app that allows you to cast. Select
"NexiGo-PJ20" from the list of options. Press the play button on the
video, and it will now display the video via the projector.
To Next Page
