Need help?Do you have a question about the NEXIQ Technologies Brake-Link and is the answer not in the manual?
Introduction to the Brake-Link™ diagnostic tool and its purpose.
Important safety guidelines for using the Brake-Link™ and testing vehicles.
Guidance on how to effectively use the manual for quick reference.
Instructions for connecting the Brake-Link™ device to vehicle ECUs.
Overview of navigation methods and button functionality within Brake-Link™.
Detailed instructions for connecting the Brake-Link™ device to vehicle ECUs.
Overview of navigation methods and button functionality within Brake-Link™.
Functionality of the Home button to return to the Select Application screen.
Functionality of the Enter button to select menu items and confirm actions.
Using the buttons below the LCD to navigate through menu screens.
Buttons on the lower portion of Brake-Link™ for direct access to options.
Using COMM buttons to select hardware/communication protocols.
Selecting the component to test using available buttons.
Using other buttons or 'hot keys' for Brake-Link™ options.
Meaning of POWER, COMM, and MODE LEDs on the Brake-Link™ device.
Procedures for selecting the correct hardware/communication protocol.
Details on using the Meritor WABCO ABS Application's features.
Retrieving information about the vehicle's ECU.
Options for viewing and clearing existing and stored faults.
Steps to view currently active fault codes on the system.
How to view fault codes that have been stored for future reference.
Procedures for clearing stored fault codes from the ECU.
Accessing and viewing data parameters gathered by the ECU.
Overview of diagnostic tests available for the ABS application.
Test to verify the functionality of the ABS Warning Lamp.
Test to ensure modulator valves are functioning correctly.
Test to check wheel sensor input and speed readings.
Momentarily activate the retarder relay contacts.
Temporarily disable electronic retarder using data links.
Monitor engine torque and RPM changes during a test.
Procedures for selecting the correct hardware/communication protocol for trailers.
Details on using the Meritor WABCO ABS Application for trailer diagnostics.
Retrieving information about the trailer's ECU.
Options for viewing and clearing trailer ECU faults.
Steps to view currently active fault codes on the trailer system.
How to view stored fault codes for trailer systems.
Procedures for clearing stored fault codes from the trailer ECU.
Accessing and viewing trailer data parameters.
Overview of diagnostic tests available for the trailer ABS application.
Test to verify the trailer ABS Warning Lamp functionality.
Test to ensure trailer modulator valves are functioning correctly.
Test to check trailer wheel sensor input and speed readings.
Viewing and modifying ECU parameters for trailers.
Listings of codes that identify specific messages in diagnostic data.
Listings of codes that identify parts of the controller with faults.
General| Protocols | J1939 |
|---|---|
| Wireless | Bluetooth |
| Functionality | Diagnostic, troubleshooting |
| Connectivity | Bluetooth |
| Power Source | Vehicle diagnostic port |
To Next Page
