EN - 2
1. Lithium batteries are prohibited to use, for 12V lead-acid batteries' charging only.
Do not attempt to use the product with any other types of battery. Charging other
battery chemistries may result in injuries, death or property damage.
2. CAN NOT charge totally dead batteries (0V or bad cells contained). Do not charge
a battery if you are unsure of the battery's specific chemistry or voltage. Test the
battery and understand the battery health status before charging.
3. This battery charger is made by waterproof materials but can not sustain in water
or rainy environments.
4. Contact us for replacement if you found the charger is abnormal or the plug and
power clips are damaged or the screen is unreadable.
5. Stop charging if the battery is damaged or liquid overflow around your battery.
Stop the charging immediately if you found the battery is overheated.
6. Charging the batteries in the vehicle is not allowed if you are going to use the repairing
mode, which may result in damages of car electronics.
Input voltage AC: 110-220 VAC, 50-60Hz
Working Voltage AC: 110-220 VAC, 50-60Hz
Charging Current: 6A (12V)
Type of Batteries: 12V
Battery Chemistries: Wet, Gel, MF, CA, EFB, AGM
Cooling: internal fan
Model: NC101 PRO
Dimensions (L x W x H): 5.9*3.2*2.5 Inches
Cord length: 25.5 Inches Weight: 0.94 lb
STEP2
Connect the charger with the outlet, AC input voltage from
110-220 volt.
STEP1
Connect the charger with the battery
(red positive and black negative)
12V
STEP3
Press button to choose the corresponding charging mode.
Important Safety Warnings
Technical Specifications
How To Use
To Next Page
Loading...
