How to Jump Start 12V Vehicle?
The red light is on, the blue lightis on, and
the beeps for a long time.
Jump starter power is low,
please recharge.
Reverse polarity connection,
please reconnect correctly.
The red and black clamps are
short-circuited,
please reconnect correctly.
Jumper cable over temperature
(≥65 ± 5℃),waiting to cool down
(≤55 ± 5℃)before the next start.
Notice:
• 1 light stands for 25% power.
When battery level is low, please charge the battery before using.
• Turn on the function button and make sure it is over 50% charged. If the
power is less than 50%, it may not be able to start your engine.
To Next Page
Loading...