Need help?Do you have a question about the Next Level Racing CHALLENGER and is the answer not in the manual?
Important safety guidelines for assembly, including tool usage and product weight.
Connecting the main base frame components using M8x15mm bolts.
Attaching the front support legs with M8x60mm bolts and nuts.
Connecting the intermediate frame parts with M8x60mm bolts and nuts.
Securing the pedal plate in a flat position using M8x15mm bolts.
Installing the vertical supports using twist knobs.
Attaching the seat rails to the frame using M8x60mm bolts and nuts.
Connecting the wheel support uprights with M8x15mm bolts and M8x60mm bolts/nuts.
Reinforcing the rear supports using M8x60mm bolts.
Attaching the seat to the frame using M8x30mm bolts and twist knobs.
Mounting the steering column bracket supports using M8x20mm bolts.
Securing the seat sliders to the frame using M8x20mm bolts.
Attaching the pedal plate using M8x15mm and M8x60mm bolts.
Alternative pedal plate attachment using M8x60mm bolts.
Installing adjustable feet and pedal strengthening bolts.
Guidance on adjusting the distance of the pedal plate.
Instructions for adjusting the steering wheel angle.
Information on how to contact support for product assistance.
Link and QR code to an assembly video tutorial.
General| Product Type | Racing Simulator Cockpit |
|---|---|
| Frame Material | Steel |
| Seat Type | Bucket Seat |
| Adjustability | Adjustable Wheel Deck, Pedal Plate, and Seat |
| Compatibility | Most Wheels and Pedals |
To Next Page
