Next Level Racing ERS2 - Step 03: Align Seat Back with Recliners; Step 04: Secure Seat Back; Step 05: Attach Recliner Top Covers

PARTS:
•
• 2 x Seat Recliner Top Covers
•
• 2 x M5 12mm Machine Screws
05
Align the holes on the Seat Recliner Top Covers with the threaded holes on the Seat Recliners. Bolt
through and secure with 2 x M5 Machine Screws.
PARTS:
•
• 4 x M8 30mm Dome Head Bolts
•
• 4 x M8 Washers
04
Bolt through and secure with 4 x M8 Dome Shaped Bolts and Washers previously uninstalled in
Step 01.
support@nextlevelracing.com
8
PARTS:
•
• NIL
03
Align the Seat Back threaded inserts with the mounting holes on the Seat Recliners attached to the
Seat Bottom.