Next Axis - Assigned Use Operation

Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
7
Operating Instructions - In Assigned Use Functionality
1a
1a
1a
1a
1b
1b
1b
1b
*After 3 consecutive incorrect user code entries, the keypad will be disabled for 1 minute (Sleep Mode).
In assigned use functionality, users unlock their assigned locker with either their 4-digit User Code or User Key. To reassign a locker to a
dierent user, follow instructions to Assign the User Credential.
Operate with the User Code
To unlock: Press = [assigned 4-digit code] `. *
To relock: Press
= ` ` .
Operate with a Manager Key
To unlock: Insert a registered Manager Key.
To relock: Insert a registered Manager Key.
Operate with the User Key
To unlock: Insert the assigned User Key.
To relock: Insert the assigned User Key.
Operate with the Programming Key
To unlock: Press = ` then insert the Programming Key.
To relock: Press
= ` then insert the Programming Key.