Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
6
Operating Instructions - In Shared Use Functionality
1a
1a
1a
1a
1b
1b
1b
1b
In shared use functionality, users enter a self-selected 4-digit User Code or insert any User Key to lock and the same User Code or User
Key to unlock. Once unlocked, the locker is available for a dierent user.
* After 3 consecutive incorrect user code entries, the keypad will be disabled for 1 minute (Sleep Mode).
** If a registered Manager Key or the Programming Key is used to relock, the previous user credential will
continue to operate the lock.
Operate with a User Code
To lock: Press = [any 4-digit code] `.
To unlock: Press
= [the same 4-digit code] `.
*
Operate with a Manager Key
To unlock: Insert a registered Manager Key.
To relock: Insert a registered Manager Key.**
Operate with a User Key
To lock: Insert any User Key.
To unlock: Insert the same User Key.
Operate with the Programming Key
To unlock: Press
= `
then insert the Programming Key.
To relock: Press
= `
then insert the Programming Key.**
To Next Page
Loading...
Need help?
General
