Next Axis - Advanced Features; Auto Unlock Settings

Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
5
Set Additional Lock Features (for shared use functionality only)
1a
1
2
2
1b
1 12 2
LED Usage Indicator
When in shared use functionality, each lock can be programmed to have the LED ash or not ash while the lock is in use. The default
setting is ON (red LED ashes while lock is in use).
To turn o the LED Usage
Indicator:
Press =` 92 `.
The LED will ash.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn o.
Auto Unlock
When in shared use functionality, each lock can be programmed to auto unlock after a set number of hours. The default setting is OFF (does
not auto unlock).
To turn on Auto Unlock:
Press =` 95 `.
The LED will ash.
Insert the Programming Key.
The LED will turn on.
Press the set number of hours from
1 - 9 9 then press `.
Two sets of two-tone beeps will be heard and the LED will turn o.
For example: Press 8 ` to set the lock to auto unlock after 8 hours.
To turn o Auto Unlock:
Press =` 94 `.
The LED will ash.
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn o.
To turn on the LED Usage
Indicator:
Press =` 91 `.
The LED will ash.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn o.