Next range - Operating Instructions (Assigned Use); Operate with User Code (Assigned Use); Operate with User Key (Assigned Use); Operate with Manager Key (Assigned Use)

Keypad Interface
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
Operating Instructions - In Assigned Use Functionality
7
*After 3 consecutive incorrect User Code entries, the keypad will be disabled for 1 minute (Sleep Mode).
In assigned use functionality, users operate the lock with their assigned user credential (either a User Code or a User Key). To reassign a lock to
a different user, follow instructions to Assign User Credentials.
Operate with the User Code
To unlock: Press
=
[assigned 4-digit code]
`
.* Open the door.
To relock: Close the door. Press
= ` `
.
Operate with a Manager Key
To unlock: Insert a valid Manager Key. Open the door.
To relock: Close the door. Insert a valid Manager Key.
Operate with the User Key
To unlock: Insert the assigned User Key. Open the door.
To relock: Close the door. Insert the assigned User Key.
1a
1a
1a
1b
1b
1b