EasyManua.ls Logo

Nextav NX PTT-U2e User Manual

Nextav NX PTT-U2e
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
NX PTT-U2e ESChat User Guide
General PTT Button Pairing Procedure
1. Enter Pairing mode:
To enter pairing mode, turn on PTT, press PTT button for 10 seconds then release.
2. Change PTT Button pairing to a new phone:
1. In phone A, forget(un-pair) the PTT in “Setting” -> “Bluetooth”
2. Turn on PTT, make sure it is NOT connected to any phone.
3. Press PTT button for 10 seconds then release (like in 1).
4. Phone B now can scan the PTT button, pair and connect the PTT.
Note:
1. When PTT button connects to phone A, PTT will remember this phone A, no other phones can discover/pair/connect to this PTT even phone A’s
Bluetooth is OFF.
2. If accidently press PTT button for 10 seconds in non-connected mode, the pairing info will be erased. Please run 1 or 2 to re-connect the PTT and
phone.
Trouble shooting:
1.Scenario: If turn Bluetooth OFF then ON in system’s setting, the link between ESChat and PTT will lost but ESChat is not able to detect this, PTT stop working.
Fix: Quit ESChat and return to desktop, then switch PTT OFF and ON and back to ESChat, now the connection will established and PTT will work again.
Note: If system Bluetooth has been OFF and ON, PTT device needs do the same, i.e. switch OFF and ON the PTT, in order to notify App the connection is re-
established.
2.Scenario Multiple BLE devices connected to the phone: suppose there’re two BLE devices, device A is other PTT and device B is Blu-PTT. Now turn off phone’s
Bluetooth and ON again, although both devices will re-connected, but Blu-PTT will not function again.
Fix: “Forget” all BLE PTT devices (include Blu-PTT) and pair/connect ONLY with Blu-PTT and try again.
3.Scenario More than one PoC Apps are running: some Apps(such as Zello) will connect Blu-PTT automatically before Blu-PTT can connect to the phone, at this
moment the phone(under Setting-> Bluetooth) will not able to connect Blu-PTT.
Fix: go Setting-> Application -> Application manager to “Force Stop the App(such as Zello) which will issue the connection with Blu-PTT, and try again.
Note: Blu-PTT supports multiple Apps, some Apps are more “aggressive” than ESChat and will unexpectedly taking the control of the PTT button.
Question and Answer IconNeed help?

Do you have a question about the Nextav NX PTT-U2e and is the answer not in the manual?

Nextav NX PTT-U2e Specifications

General IconGeneral
BrandNextav
ModelNX PTT-U2e
CategoryAmplifier
LanguageEnglish

Summary

General PTT Button Pairing Procedure

Enter Pairing Mode

Procedure to enter PTT pairing mode by pressing the PTT button for 10 seconds.

Change PTT Pairing to New Phone

Steps to unpair the current phone and pair the PTT with a new phone via Bluetooth.

Troubleshooting PTT Connection Issues

PTT Stops Working After Bluetooth Toggle

Fix for PTT losing connection to ESChat after toggling phone's Bluetooth off/on.

Multiple BLE Devices Affecting Blu-PTT

Resolve issues where Blu-PTT fails after reconnecting multiple BLE devices.

Other Apps Interfering with Blu-PTT

Force stop aggressive apps that may conflict with Blu-PTT connection.

PTT-U2e Device Specifications

Technical Features and Memory

Details on transceiver, processor, memory, power management, and I/O peripherals.

Federal Communication Commission Interference Statement

FCC compliance statement regarding radio frequency energy and interference for the device.

FCC Interference Correction Measures

Measures to Correct Interference

Recommendations for users to correct radio or television reception interference.

FCC Caution and Compliance

Caution regarding modifications and statement of compliance with FCC rules.