The information given below explains the various items that are displayed on the screen when your
BikeCam is in Video mode, some items will only be displayed once the relevant function has been
selected within the Video menu, as described below.
1. Time Lapse: displays the time lapse setting.
2. WDR: remains on screen permanently as the BikeCam utilises WDR technology.
3. Recording: appears on screen and flashes red when a recording is in progress.
4. Mode: indicates the BikeCam is in Video mode.
5. Resolution: displays the current resolution.
6. Video Length: displays the length of the individual recordings (minutes).
7. Exposure: displays the exposure level.
8. Microphone: Indicates whether audio recording is on or off.
9. Power: displays power source being used (external or battery).
10. GPS: the icon will flash whilst the BikeCam locates satellites. Once a stable signal is
received, the icon will stop flashing and remain on screen.
11. White Balance: displays the white balance setting.
12. HUD Speed & Compass icon: Shown on screen when function has been turned on
13. Time: current time.
14. Date: current date.
15. Recording Duration: displays the length of the current recording.
16. Memory Card: indicates whether a memory card is present.
17. Protected File: shown on screen when a video file has been protected by activation of
the internal G Sensor or by pressing the file protect button.
See the next page for full details of the options available within Video mode.
VIDEO MODE
18
16
5
14
2
3
4
6
7
8
15
10
1
1
17
13
200MS
9
12
1
To Next Page
Loading...
General