NextDent LC-3DPRINT BOX - Page 6

Page 6 of 10
Description of function key
Start/Stop button
Start / Stop button for starting and stopping
operation.
Increasing button
Button for increasing the operation time.
Decreasing button
Button for decreasing the operation time
Program button
Program button for choosing the pre-set
programs.
(pre-set programs are: 10, 20 and 30 min)
Fan
-
-
-
The machine is equipped with a fan to cool down the
inside and maintain a proper working temperature
inside the machine.
Fan operates when the machine is in use and cool-
ing is needed.
If the fan does not work the temperature will raise
and ERROR1 will appear in the display. (see error
message)
Fuse Box and AC power cable socket
FUSE AC50V T5.0A
Increase
button
Front panel
Fan
Decrease
button
Program
button
Start/Stop
button
Display / LCD
Fuze Box and AC power
cable socket
Front Rear
Front panel
Identication label
Side
Power On / Of button