Nextdrive Zero 2.0 - Handlebar Assembly; Tightening and Orientation; Charger Usage; Connecting the Charger

3 Assembling the Handlebar
1）Turn the handlebars until
they are fully tightened.
*Notice there are left and right
handlebars with different directions
4 Using the Charger
1）Open the rubber cap of charging port
2）Plug in the charger
5 Folding Steps
2）Fold：
1.Pull the folding pin
2.Fold back the steering Part
3.Hear the click sound when the folding step is done
1）Unfold：
1.Set up the unit and press the folding pin
2.Pull down the deck
3.Hear the click sound when the unfolding step is done