4. Warning
● When using the camera, please avoid rain, fire and lightning.
The camera’s working humidity range is: 20%-50% indoor,
20%-70% outdoor. Working temperature range is: -10°-50℃
(14°-122°F) indoor; -20°-55℃ (-4°-131°F) outdoor.
● The IP Camera is designed to ensure the security and
confidentiality of its users, but cannot completely guarantee
the threat of being compromised, due to various setup
circumstances. We highly advise that you only use the camera
on a trusted password protected Wi-Fi network. This camera is
recommended for general purpose monitoring only. The user
acknowledges the risk of using the device otherwise.
☆ User can only bind when the camera device is in the Binding
mode (i.e. LED is blue and flashes once a second). Otherwise, you
cannot bind a camera device when outside of the Binding mode.
☆ Make sure the environment around the camera is quiet when
transmitting the “sound wave” and the outer speaker of your
phone is close to the microphone in the side of the camera.
☆ If shown warning “WIFI does not exists”, please make sure
your Wi-Fi network name is correct.
☆ If shown warning “WIFI connection fail”, please make sure
your Wi-Fi password is correct.
☆ If shown warning “Network abnormal please check router
configuration”, please make sure your router is connected to
Internet.
1) Cannot bind camera device?
5．FAQ
☆ Check the compatibility of the camera device with your router.
Supports 802.11 b/g/n 2.4GHz wifi network.
☆ Check whether the name and password of WIFI has been
changed.
2) Cannot connect to Internet?
Switch between “SD” and “HD”.
3) Video quality is not clear?
-11-
To Next Page
Loading...
