Nextech QC3862 - User Manual

Miniature 1080p WiFi IP Camera
QC3862
User Manual
Thank you for purchasing this product, the machine uses a unique
ultra-portable design, it can be applied in various fields, it is very
convenient, safe and bring a colorful life for you, please set your
camera correctly in accordance with the guidelines of the quick
steps .
I. Start
Switch the power to ON to boot up the camera. It will take about
30-60 seconds to finish booting up.
With the power switch ON, hold down the reset button for 5
seconds to restore the factory settings.
1. The blue light is the power indicator. Solid blue means the
device is on.
2. The red light is the WiFi indicator.
a. Point-to-point mode (direct connection between phone
and camera): red light flashes slowly.
b. Remote access mode (camera connected to a WiFi
router): solid red light.

Summary

Start and Indicator Lights

Power Indicator Status

Describes the blue light as the power indicator; solid blue means the device is on.

WiFi Indicator Status

Explains the red light for WiFi, detailing states for point-to-point and remote access modes.

Infrared Night Mode Control

Instructions on using the app to enable or disable infrared night mode.

Indicator Lights Control

Instructions on using the app to enable or disable device indicator lights.

APP Software Download

Point-to-Point Connection

Connect Camera to WiFi Router

Network Configuration Method 1

First method for connecting camera to WiFi, involving system prompts for network selection.

WiFi Configuration Method 2

Second method for connecting camera to WiFi, using 'Wi-Fi Config' to select network and enter password.

Advanced Camera Settings

Memory Card Video Settings

Configures memory card video modes and screen size via 'Micro SD Config'.

Alarm Settings Configuration

Enables or disables mobile detection alarm via 'Advanced Configuration'.

Video Page Icons and Buttons

Technical Specifications

Frequently Asked Questions (FAQ)

Troubleshooting Remote Monitoring

Addresses issues with smooth remote monitoring by adjusting resolution.

SD Card Saving Issues

Explains that SD cards must be formatted for first-time use to save data.

Connection and Network Problems

Guides users to select the correct connection method for network issues.

Finding Lost Passwords

Details how to reset the camera to factory settings to recover the password.

Nextech QC3862 Specifications

General

Night Vision	Yes
Two-Way Audio	Yes
Motion Detection	Yes
Local Storage	MicroSD card (up to 128GB)
Storage Capacity	Up to 128GB