4
BEFORE FIRST USE
WARNING: The manufacturer is not responsible for any potential injury from misuse
Prior to using your product, please read all the safety and operating instructions
thoroughly. Please ensure you follow the steps below before using the product. We
recommend you keep the original packaging for storing the product when not in use.
Please pay close attention to the section entitled Important Safety and General
Instructions. Find a safe and convenient place to keep this instruction manual for
future reference.
Unpack the product but keep all packaging materials until you have made sure
your new product is undamaged and in good working order. Ensure you have all
accessories listed in this manual. Plastic wrapping can be a suffocation hazard for
babies and children so ensure all packaging materials are out of their reach.
OPERATION INSTRUCTIONS
1. Install the battery into battery compartment. Red LED Here will blink after
battery assembling successfully it means keyboard has power.
2. Turn the power switch on keyboard back to “ON”, power is ON
3. Press “Connect” button, Red led will keep flash. Please open “Bluetooth setting”
on your device and it will search automatically
4. There’s a device “Bluetooth 3.0 Keyboard”, click here and a set of four-digit code
will be generated randomly
5. Enter four code above, Pairing completes. Red lights stop flashing, and turns off
after 3 seconds
Function LED Light Sequence
Battery Assembly Red lights stop flashing, red light turns off after 3
seconds.
Pairing Start Red light flashes.
Pairing Complete Red lights stop flashing, red light turns off after 3
seconds.
Out of Range Bright red light, turns off after 5 seconds.
Low Battery Indicator Slow flashing red light, every 5 seconds confirmation
To Next Page
