5
DESKTOP CONTROLLER
INSTALLATION
USAGE INSTRUCTIONS
Desktop Controller
The desktop controller can be used to easily switch
between computers without having the main unit on your
desk. Press the button to switch.
The KVM cable should be connected to the PC port of the KVM switch, while a set
comprising a keyboard, mouse, and monitor should be connected to the control
port of the KVM switch. Once all hosts have fully booted up, the KVM switch will be
ready for use.
Boot mode
When connecting multiple PCs, you can power on the specific PC you wish
to operate simultaneously with the others, ensuring all PCs are powered up
together. Note that you should avoid switching between PC ports until each PC has
completed the boot process.
Switching mode
Once you have finished step 1, you can use the button on the KVM panel to switch
between ports. For instance, if you need to control the PC connected to the
second port, simply press the corresponding button. When the indicator for PC2 is
illuminated, you can then operate that PC.the button. When the indicator of PC2 is
on, you can operate the PC.)
To Next Page
Loading...