Nexus 4X4 - Power and Maintenance; AC Power and Linking; Replacing the Fuse

Nexus™ 4x4 QRG EN
3
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
The Nexus™ 4x4 supports power linking in the quantities listed below. Do
not link more than:
• 4 products at 120 V,
• 7 products at 208 V, or
• 8 products at 230 V.
Power linking cords can be purchased separately.
Power Linking
Diagram
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground Green/Yellow Green/Yellow Green
Replacing the
Fuse
1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3.
Remove blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place.
5. Reconnect the product to power.
Other Products