Need help?Do you have a question about the Nexus NX Start Pack 1 and is the answer not in the manual?
Lists all components included in the NX Start Pack 1.
Instructions for product registration via warranty card.
Guides the user through physically mounting the instrument.
Details the process of mounting the WSI-box.
Covers location and mounting of the wind transducer.
Explains correct positioning for log and depth sensors.
Steps for fitting and securing through-hull transducers.
Procedures for cored hulls and checking for leaks.
Wiring and power connections for the system.
Ensures the wind transducer has adequate power before pairing.
Steps to wirelessly connect the wind transducer to the WSI unit.
Guidance on changing rechargeable cells for the wind transducer.
Process for assigning a unique ID to each installed instrument.
Details on displaying and using speed-related data.
Details on displaying and using depth-related data.
Moving, copying, locking, and cancelling display sub-functions.
Steps for calibrating speed, units, and damping.
Setting depth units, adjustments, and temperature units.
Adjusting temperature, air pressure, wind speed, and beep settings.
Cleaning, connection checks, and storage advice.
General fault finding, actions, and error code explanations.
Details dimensions, power, and temperature range for the Sea Data instrument.
Details dimensions, power, and temperature range for the WSI-box.
General, limited warranty, conditions, and claims procedure.
General| Brand | Nexus |
|---|---|
| Model | NX Start Pack 1 |
| Category | Controller |
| Language | English |
To Next Page