INSTALL MOBILE APP & CREATE ACCOUNT.
2
TEST DEVICE FOR OPENER COMPATIBILITY.
Use the included single wire or take a straightened-out paper clip and put one
end to one of 2 terminals that the wall button wires go to and the other end of
the paper clip to the other terminal. By doing so, your garage door should
activate. Check out Nexx Garage website http://nexxgarage.com/videos for
video of this test.
If this test fails your device may not be compatible so STOP and contact
customer support: support@nexxgarage.com.
1
Below is an outline of the steps in the installation process.
Please refer to the Manual for more detailed instructions.
INSTALLATION STEPS
TOOLS NEEDED
CB
A
Flatbed screwdriver Step ladder Masking tape
CHECK BOX CONTENT
FE
D
C
B
A
Door sensors and cable
4 self-tapping screws
Installation Manual
Nexx Garage device
8 double-sided tapes
Single Wire
CONTACT
Website: www.nexxgarage.com
Customer Service/Tech Support: support@nexxgarage.com
Product Return: return@nexxgarage.com
NEXX GARAGE QUICK START GUIDE
Thank you for your purchase of Nexx Garage!
To Next Page
Need help?
General
