8
The Phone Book Memory
Dialing From The Phone Book
1. Press button.
2. Scroll to the required memory location using or buttons. To
quick search in the Phone Book press the corresponding number
button one or more times for the first letter (refer to the table on the
previous page).
3. Press button or CALL BACK button to dial the displayed number.
If you do nothing the phone will return to standby mode.
Changing Phone Numbers/Names
1. Press button.
2. Scroll to the required memory location using or buttons.
3. Press and hold STORE button until “EDIT?” is displayed.
Press STORE button.
4. Changes to the displayed telephone number can be made using
DELETE button and or buttons. Press STORE button.
5. Changes to the displayed name can be made using DELETE button
and or buttons.
6. Press STORE button to confirm the changes.
Deleting A Phone Book Entry
1. Press button.
2. Scroll to the required memory location using or buttons.
3. To delete a single number, press DELETE button, “DELETE?” will
be displayed. Press and hold DELETE button until the displayed
telephone number disappears.
4. To delete all numbers, press and hold DELETE button until “DELETE
ALL?” is displayed. Press and hold DELETE button until “EMPTY” is
displayed.
The telephone has 2 one-touch memories (M1 and M2) and 10 two-touch
memories (MEM) for the most frequently dialed telephone numbers. When
a number is stored into Memory you will press one or two buttons depending
on where the desired number is stored. The direct one-touch memories are
M1 and M2. To call a two-touch memory number, first press MEM, then the
corresponding numerical digit (0-9) on the keypad.
Storing One-Touch Memories
1. Press STORE button.
2. Enter the telephone number to be stored (up to 22 digits).
Press STORE button.
3. Enter the name (up to 16 characters). Press the corresponding number
button one or more times for the first letter (see the above table).
Press STORE button.
4. Press either M1 or M2 button to store the number.
Dialing Using One-Touch Memories
1. Lift the handset or press button and wait for a dial tone.
2. Press either M1 or M2, the stored telephone number will now be dialed.
Storing Two-Touch Memories
1. Press STORE button.
2. Enter the telephone number to be stored (up to 22 digits).
Press STORE button.
3. Enter the name (up to 16 characters). Press the corresponding number
button one or more times for the first letter (see table on page 7).
Press STORE button.
4. Press either 0-9 to store the number.
Dialing Using Two-Touch Memories
1. Lift the handset or press button and wait for a dial tone.
2. Press MEM button.
3. Select a memory location by pressing the relevant keypad digit 0-9.
To Next Page
Loading...
