9
TROUBLESHOOTING
If your turntable is not working as it should, these suggestions might help you solve
the problem. If the turntable still does not operate properly, take it to your local
electronic store for assistance.
Symptom Possible Cause Suggestion
Turntable does not work
when plugged into an AC
outlet
Connected receiver/
amplifier not turned on.
Turn on receiver/
amplifier.
Rubber drive belt slipped,
broken, or not mounted
properly.
Check rubber drive belt.
Power problem. Check the power cord and
AC outlet.
No sound Receiver/amplifier vol-
ume set to minimum.
Adjust receiver/amplifier
volume.
Turntable not connected
correctly to receiver/ampli
-
fier.
Recheck connections.
LINE OUT ON/PHONO OUT
OFF
is set to PHONO OUT
OFF
and turntable is con-
nected to receiver’s/ampli-
fier’s line-level input jacks.
Set LINE OUT ON/PHONO
OUT OFF
to LINE OUT ON.
Stylus needs replacing. Replace the stylus
(See “Cleaning/Replacing
the Stylus” on Page 13).
To Next Page
Loading...