Need help?Do you have a question about the NGS Black Artica and is the answer not in the manual?
General| Driver unit | 40 mm |
|---|---|
| Frequency range | 20 Hz - 20 kHz |
| Battery capacity | 300 mAh |
| Playback time | 8 hours |
| Charging time | 2 hours |
| Driver Type | Dynamic |
| Driver Size | 40 mm |
| Sensitivity | 108 dB |
| Connectivity | Bluetooth |
| Wireless range | 10 meters |
| Impedance | 32 Ohms |
| Microphone | Built-in |
| Connection | Bluetooth |
| Ear Coupling | Circumaural |
Lists the Bluetooth profiles supported by the NGS ARTICA NGS headset.
Identifies and describes key headset components, including buttons, indicators, and ports.
Instructions for initial battery charging before first use.
Guidance on when and how to charge based on low battery indicators.
Step-by-step process for charging the headset using the USB cable.
Important safety information regarding battery disposal and potential hazards.
Instructions for switching the headset on and off using the multifunction button.
Steps to put the headset into pairing mode and connect with Bluetooth devices.
Detailed steps for pairing the headset with a mobile phone via Bluetooth.
Covers making, answering, ending, transferring, and muting calls.
Details on controlling music playback, including volume, pause, play, and track selection.
Important notes regarding music transmission and AVRCP compatibility for playback.
Instructions to restore the headset to factory defaults, deleting pairing information.
Explanation of the red LED status during the charging process.
Describes LED patterns indicating pairing mode, connection status, and low power.
Provides advice on keeping the headset in good condition and avoiding damage.
Lists detailed technical data of the headset, including Bluetooth version, range, and battery life.
To Next Page
