NGS SEAWEED - Quick Start Guide; Charging the Device; Loading Audio Content; Connecting Headphones

ENGLISH
3
1. Chargebatteryconnecting theUSBcable to the socket
(6)forabout1 hour. Red LEDshouldturn on steady. Your
player will be charged while being connected to PC. You
can also charge the player by using a power charger (5V
0.5A).
2. UploadsongsoraudiobooksusingUSBcable (Mp3 &
WMA).
3. Connectearphones.
4. SwitchONbylongpressing(3sec)theplay button . Red
LEDturnsblinking indicatingMP3 mode.
5. Long pressforward/backward buttons (3/4)
adjustVOLUME (+/–).Short press forward/backward
buttons (3/4) to move to next or previous. To adjust the
volume on radio mode, we must adjust it in the MP3 mode,
and then return to the radio mode at the volume we have
established.
6. There are 2 play modes: MP3 and FM. Press the button
and then hold the + or – button to switch to FM mode. To
return to the MP3 mode, you must press the WATERPROFF
button.
7. Auto FM Mode: Press and hold the + or – button to switch
to FM mode. Then long press (2sec) FM button to enter
into Auto FM. Unit will automatically scan and save all FM
stations with sufficient reception in your area (1-2min).Short
press the + or – buttons to select one of the saved stations.
QUICK START GUIDE