8.4 System Status Indicators
(Front Panel)
Located on the right hand side of the front panel
are two LEDs. They are used to indicate the
functional status of the X1 Crossover.
P - Power LED (green) - indicates the X1 is on
and in a ready condition.
S - Standby LED (amber) - indicates the X1
crossover is in "standby" mode.
8.5 Fine Tuning Chart
The chart below was developed to assist you in
the further fine tuning of your subwoofer or
tower system. Should you be unable to achieve
satisfactory performance from your Evolution
subwoofer system using the fine-tuning chart,
contact your authorized NHT dealer or call our
Customer Hotline at 1-800-NHT-9993 (648-
9993).
To Next Page
Loading...