USER GUIDE
NI sbRIO-9601/9602 and
NI sbRIO-9602XT
Single-Board RIO OEM Devices
This document provides dimensions, pinouts, connectivity information,
and specifications for the National Instruments sbRIO-9601, sbRIO-9602,
and sbRIO-9602XT. The devices are referred to inclusively in this
document as the NI sbRIO-9601/9602/9602XT.
Caution The NI sbRIO-9601/9602/9602XT must be installed inside a suitable enclosure
prior to use. Hazardous voltages may be present.
Caution National Instruments makes no product safety, electromagnetic compatibility
(EMC), or CE marking compliance claims for NI sbRIO devices. The end-product supplier
is responsible for conformity to any and all compliance requirements.
Caution Exercise caution when placing the NI sbRIO device inside an enclosure.
Auxiliary cooling may be necessary to keep the device under the maximum ambient
temperature rating for the NI sbRIO device. Refer to Specifications section for more
information about the maximum ambient temperature rating.
Figure 1 shows the NI sbRIO-9601/9602/9602XT.
Figure 1. NI sbRIO-9601/9602/9602XT
To Next Page
Need help?
General