VII
Bedienungsanleitung/ Instruction Manual
HE.13575_A © 06/2010
PC-280
VII
Bedienungsanleitung/ Instruction Manual
Tab. 1
When Why
20 sec
after working cycle
2 x
after inserting the battery Self check
20 sec/2Hz
after working cycle
20 sec/5Hz
while exceeding the temp. limit Unit too hot
20 sec
20 sec/2Hz
after working cycle
+
1 x
after working cycle Error: the required pressure has not been reached. The
operator has interrupted the pressing cycle manually while
the motor was not running.
3 x 3 x
after working cycle Serious Error: The pressure has not been reached while the
motor was running.
To Next Page
Loading...
General