◆ EN “SUN” SENSOR – This sensor protects what is underneath the awning when sunlight is especially strong. The
manual commands sent by the user prevail
over the autonomous operation of the system and the interaction between the
two modes is as follows:
– autonomous operation – When the sensor detects a luminous intensity above the set threshold, after 2 minutes
the For-
Max T commands the opening of the awning (▼). When the luminous intensity drops below the set threshold, after 15 min
-
utes the For-Max T commands the awning to rise (▲).
– manual operation – Manual commands can be sent at any time. These commands co-exist and overlap the commands
sent automatically by the system.
sun brightness
momentary drop in brightness, of small
entities, within the hysteresis threshold
set threshold
positioned at 50%
of the set threshold
hysteresis threshold
sun
brightness
autonomous
operation
manual
operation
after 2 minutes
system active
after 10 minutes
system deactivated system deactivated
manual commands enabled
7
To Next Page
Loading...
