23
GB
This function checks the number of combinations valid for both outputs
1. Enter the programming password
2. Press to confirm the password
3. Enter to select the operation
4. Press to confirm
Some sequences of tones will now be heard; their meanings are described in Table “C10”
Table “C12” Count the combinations valid for the two outputs and (Relays 1 and 2) Example
5
5
Table “C13” Deactivate all the combinations finishing with a determined number Example
This function deactivates all the combinations finishing with a certain number: it’s
a simple operation, which allows to disable entire groups of people. In the example,
combinations 5, 15,25,35….1275, 1155… are deactivated while 51, 52….1250… remain
valid. Repeat the operations with another number to deactivate other numbers,
combinations ending in 5 or 7, for example. The combinations are disabled, not cancelled
from the memory.
1. Enter the programming password
2. Press to confirm the password
3. Enter to select the operation
4. Press to confirm
5. Enter the last number of the combinations required to be deactivated
6. Press to confirm
7. Enter the last number of the combinations required to be deactivated a second time
8. Press to confirm
N.B.: If the operation was successful 3 tones will be heard
To Next Page
Loading...
Need help?
General
