33
GB
(5s)
?
(5s)
This operation allows MASTER CARD 1 to be memorised
1. Hold a new CARD up to the READER for at least 5 seconds
2. After 5 seconds two tones will be heard
3. Remove the new CARD
Table “F1” Inserting MASTER CARD 1 Example
Table “F2” Inserting MASTER CARD 2 Example
This operation allows MASTER CARD 2 to be memorised
1. Make sure that MASTER CARD 1 has already been inserted
2. Hold the second new CARD up to the READER for at least 5 seconds
3. After 5 seconds two tones will be heard
4. Remove the second new CARD
N.B.: The CARD inserted as MASTER 1 can also be used as MASTER 2
used both as MASTER 1 and MASTER 2. In this case, the DYNAMIC
option can be used as well as the STATIC 1 and STATIC 2 options to
activate the outputs, that is, the user may decide, using the CARD
whether to activate output N°1 or output N°2.
Programming the two MASTER CARDS:
The first thing to do is to insert the 2 MASTER CARDS when the
memory is still empty; in practice they are the first two CARDS to be
held up to the READER for at least 5 seconds.
No other operations can be carried out until the two MASTER
CARDS have been inserted.
To Next Page
Loading...
