17
NICERECOVERY.COM
STEP 6 Review and confirm your settings by pressing
START or press BACK to change the settings.
STEP 7 During your therapy session you can change
the cold or compression settings simply by
pressing 1 – 5 or HIGH, MED or LOW.
STEP 8 When the therapy session is complete is complete
turn the unit OFF. Once the unit is OFF, you may
now remove your therapy wrap.
NOTE: Compression should be turned OFF when the therapy wrap is not on the patient.
Allowing the wrap to inflate while unattended or to inflate all the way can cause damage
to the wrap and will reduce the life of the wrap and may void the warranty.
To Next Page
Loading...
Need help?
General