Settings for temperature, compression, and duration should be used as directed
by your physician or medical professional.
STEP 1
Turn on the power switch on the back of the
device. The touch screen will illuminate and
display the “Nice” logo. Push “NEXT” . Review
the checklist on the touch screen. Confirm and
press “NEXT”.
STEP 2
Select desired COLD LEVEL and press NEXT.
Cold Settings are as follows:
Level 1 = 58F (14.4C)
Level 2 = 54F (12.4C)
Level 3 = 50F (10C)
Level 4 = 46F (7.7C)
Level 5 = 42F (5.5C)
STEP 3
Select desired COMPRESSION LEVEL and
COMPRESSION TYPE and press NEXT.
STEP 4
Choose a MANUAL time setting of 5 – 40 min-
utes for a single therapy session OR choose a
PRESET PROGRAM for multiple sessions and
press NEXT.
STEP 5
Review and confirm your settings by pressing
START or press BACK to change the settings.
STEP 6
During your therapy session you can change
the cold or compression settings simply by
pressing 1 – 5 or HIGH, MED
or LOW. To Dim, Press Dim switch, to brighten
- touch screen.
To Next Page
Loading...
Need help?
General