10
CHARGING AND BATTERY INFORMATION
We recommend fully charging the battery before the headphones’ rst use. Use the enclosed
micro USB cable to charge the headphones. The charging voltage and electrical current is
5V/1A.
Charge the headphones if the LED indicator starts to shine red. An audio signal will alert you
when only several minutes of use remain. A complete charge of the battery takes approx. 1.5
hours.
SAFETY INFORMATION
Listing to music on above-average volume can damage your hearing. Do not expose
the headphones to liquids or moisture. Do not expose the headphones to too high/low
temperatures
and do not attempt to take the headphones apart. Keep the headphones away from sharp
objects and falls from high places.
SPECIFICATIONS
Bluetooth version: 4.2
Supported Bluetooth proles: A2DP v1.3, AVRCP v1.5,HFP v1.5
Frequency: 20Hz - 20kHz
Sensitivity: 103+/-3dB
Playback period: up to 15 hours (on 70% volume)
Conversation period: up to 15 hours
Range: up to 10 m
Battery: 300mAh
Speaker: 40mm
Charging period: 2 hours
To Next Page
Loading...
