17
FACTORY SETTINGS
In case of technical issues, reset the earphones to the factory
settings as follows.
1. Make sure your device has Bluetooth turned o.
2. Remove one headset piece from the charging case and briey
press the multifunction button ve times.
3. Put the headset back in the charging case and repeat this
procedure with the other piece.
4. Remove both headphones from the charging case at the same
time and pair with your device.
SPECIFICATIONS
BT: 5.1
Frequency band: 2.4 GHz
Radiofrequency power: ≤ 2.5 mW
Supported BT proles: HFP, HSP, A2DP, AVRCP
Supported codecs: AAC, SBC
Degree of protection: IPX4
Transmission distance: 10m
Frequency: 20Hz - 20kHz
Sensitivity: 94db ± 3dB
Impedance: 16 Ω
Speaker: 6mm
Playback time o one charge: up to 5 hours
Earphones battery capacity: 40mAh
Charging box battery capacity: 300mAh
To Next Page
Loading...
