START-UP AND PAIRING / FACTORY SETTINGS:
Before the rst start-up, insert the new headset into the charging box and let it
charge together with the old headset. It is now necessary to pair the headphones
by using the factory settings as follows. Remove one headset from the charging
case and connect it to your device. Press and hold the multifunction button. Your
device will announce that the handset has been paired rst. Keep holding the
button. The device will show that it has been reconnected next. At that moment,
release the button. Put the headset in the charging case. Repeat the same process
with the other headset. This will nish the factory settings.
PACKAGE CONTENTS:
Niceboy HIVE Podsie 2021 Headphone
Manual
For a description of other product features and parameters, see the manual avai-
lable at https://www.niceboy.eu/en/support/centrum-stahovani
SAFETY INFORMATION
Listening to music at very high volume can damage your hearing. Do not expose
the device to uids or humidity. Do not expose the device to extreme temperatures
or try to disassemble it. Protect the device from sharp objects and falls from height.
Batteries – improper handling (prolonged charging, short circuit, breakage by other
objects, etc.) may result in re, overheating or battery leakage. The battery or accu-
mulator that may be included with the product has a service life of six months, as it
is a consumable. Information on all frequency bands in which the radio equipment
operates and intentionally transmits radio waves as well as the maximum radio
frequency power transmitted in the frequency band in which the radio equipment
is operated is included in the instructions and safety information.
EN
To Next Page
Loading...
