16
Microphone – 13
• For best results,keep within 3 feet of the mic while speaking
NFC Area – 14
• Open NFC and Bluetooth on your device; keep your device close to the center of the NFC area
(near the top speaker‘s MIC). Pairing should be automatic.
Bluetooth Indicator – 15
• When device is in Bluetooth mode, display will be blue.
TF Indicator – 16
• When device is in TF card mode, display will be yellow.
AUX IN Indicator – 17
• When device is in AUX IN mode, display will be green
Hang Buckle – 18
• Assist with carrying and strapping device
Charging Port – 19
• Insert the power cord into the Micro-USB port of the device. Charging begins automatically even if
the device is powered o.
DC 5V/1A Output Charging Port – 20
• 5V output charging port for mobile phones and other equipment. This port output voltage is DC
5V; current is 1A.
• Note: Only when device is booted will the external output charging function work.
AUX IN Port – 21
• After the machine is turned on, use this port to connect speaker to an external media device via
an AUX cord.
TF Card Port – 22
• After the machine is turned on,insert the TF card into this slot to play stored media. In this mode,
the indicator light will be yellow.
Note:Due to technical limitations,the speaker can only play audio from a micro SD card that is for-
matted as FAT32 and not NTFS.If you are having diculty playing music from your card,please check
that your card is formatted correctly.
EN
To Next Page
Loading...
