16
CHARGING
The battery status is displayed by the battery symbol on the band’s home screen display. Use the char-
ging cable that comes included in the packaging to charge the tness band. Use the 3-pin connector
located on the cable to the body of the tness band. Then connect the USB connector to a PC or to
any other type of adapter, for example, that of a mobile phone (we recommend an output current of at
least 1A and 5V voltage). The band takes approximately 2 hours to fully charge.
PARAMETERS
Display: 0.96“ OLED
Battery: 90 mAh
Battery life: 7 days
Bluetooth version: 4.2
Range: 10 m
Degree of coverage: in accordance with the IP67 standard
This product meets all basic EU regulation requirements placed upon it.
Avoid places with a strong magnetic eld and do not subject the device to direct ames. Do not take
the device apart and do not attempt to repair the device on your own. Do not introduce the device to
temperatures higher than 45°C.
To Next Page
Loading...
