Product Accessories
Operating Procedures
Preparation Work.
Installation And Disassembly
Of Jet Tip
The jet tip and other changeable
components can be purchased at retail stores.
Standard jet tips x 2 Power recharger
Extremely important! Prior to
using for the first time, please
fully charge the device, and
insert the USB plug into the
power socket, as well as
connect to a power supply.
During power charging the
product cannot be used.
Insert thejet tip into the
spray head hole by
screwing it in, until you hear
a clicking sound.
As shown in Diagram 4,
open the water tank lid and
pour water into the water
tank;
Note: please ensure that
when pouring water into the
water tank, the device is
switched off.
If changing or removing
the jet tip, please press
on the disassembly
button on the jet tip
handle before removing
the jet tip.
To Next Page
Loading...