To Next PageTo Next Page
Need help?Do you have a question about the Nicotra RDH and is the answer not in the manual?
General| Impeller Type | Backward Curved |
|---|---|
| Type | Centrifugal |
| Application | Ventilation |
| Voltage | 230/400 V |
| Frequency | 50Hz/60Hz |
Specific information for fans intended for use in potentially explosive atmospheres.
Details found on the fan's identification plate, including model and technical specifications.
Approximate weights of standard fans, excluding packaging.
Guidelines for safely moving and lifting fans to prevent damage.
Conditions and duration for storing fans to maintain their integrity.
General and specific conditions for fan operation, including ATEX requirements.
Maximum power, speed, and temperature limits for fan operation.
Information on the fan impeller's static and dynamic balancing grade.
Details on the types of bearings used and their expected lifespan.
Specifications regarding shaft diameter selection for critical speed.
Instructions for securely mounting the fan to a base or frame.
Recommendations for setting up the pulley and belt drive system.
Standard and optional safety devices for fan operation.
Checks to perform after the fan is installed but before operation.
Steps for safely initiating fan operation.
Regular servicing tasks to ensure smooth fan operation.
Step-by-step guides for replacing fan bearings.
Specific operating limits for ADH ATEX model fans.
Specific operating limits for RDH ATEX model fans.
Specific operating limits for AT ATEX model fans.
Specific operating limits for ASH ATEX model fans.
Specific operating limits for RSH ATEX model fans.
