To Next Page

To Previous Page

Cod. 985719 – 00 / July 2004

5.1. ORDINARY MAINTENANCE ................................................................................................. 14

5.1.1. ATEX version 15

5.1.2. Drive 15

5.1.3. Bearings 15

5.1.4. Bearings lubrication 15

5.2. REPLACING INSTRUCTIONS FOR BEARINGS .................................................................. 17

5.2.1. Dismantling the bearing with eccentric locking collar 17

5.2.2. Mounting the bearing with eccentric locking collar 17

5.2.3. Dismantling the plummer block with ball bearing and eccentric locking collar 18

5.2.4. Mounting the plummer block with ball bearing and eccentric locking collar 18

5.2.5. Dismantling the plummer block with ball bearing and adapter sleeve 18

5.2.6. Mounting the plummer block with ball bearing and adapter sleeve 18

5.2.7. Dismantling the SNL plummer block with self-aligning ball bearing and adapter sleeve 19

5.2.8. Mounting the SNL plummer block with self-aligning ball bearing and adapter sleeve 19

5.2.9. Dismantling ConCentra roller bearing 22

5.2.10. Mounting ConCentra roller bearing 23

6. ATEX – DECLARATION OF CONFORMITY ..................................................... 26

ADH ATEX - OPERATING LIMITS…………………………………………………..27

RDH ATEX - OPERATING LIMITS ..………………………………………………..28

AT ATEX - OPERATING LIMITS …..……………………………………………….29

ASH ATEX - OPERATING LIMITS ..………………………………………………..30

RSH ATEX - OPERATING LIMITS …..……………………………………………..31

Nicotra RSH User Manual

Questions and Answers: